- Press Releases
Teignbridge India
Our Group Managing Director has been in India this week, meeting with the Indian Navy at the Ministry of Defence Headquarters in Delhi and visiting our class approved factory and foundry in Vadodara.
- Press Releases
Hendy Power set to showcase FPT Industrial IMO Tier III ready engine range at Seawork 2023
Hendy Power is set to showcase FPT Industrial engines which meet the IMO Tier III emissions regulations at Seawork 2023 as environmental and operating performance continue to be a top priority for marine operators.
- Press Releases
ADSW, COP28 and sustainability in the MENA – a step forward, but so much more to be done
“We need to go much further and much faster. We’re playing catch-up in our efforts to keep 1.5°C alive.”
- Press Releases
Significant investment in the future of green maritime tourism in Kent
Jetstream Tours has spent the end of the summer season in engineering mode. Despite a challenging few years and a good weather September predicted, the tour company closed its doors temporally to embark on its biggest engineering project to date.
- Press Releases
VOYAGER AI’s for military USV’s
Successful commissioning and trials last week where our #VOYAGER #AI software was retrofitted to a 15m military #USV to provide full IMO Degree 4 Autonomy upon Loss of Communications enabling the Mission to continue for this high value, maritime asset.
- Press Releases
Multiple power take-off or dual drive input?
Requirement for powering ancillary equipment onboard your vessel?
Connection of back-up motor to power equipment creating a dual drive system? - Press Releases
22.75m FISHING VESSEL ‘CELESTIAL DAWN’
Macduff Ship Design are pleased to announce delivery of the fishing vessel ‘CELESTIAL DAWN, BF 109’, to owner George Hepburn and partners.
- Press Releases
Diverse Marine & NR Marine Services announce order for First of Class 27m CTV
Diverse Marine and NR Marine Services are proud to announce the contract signing to construct the first of class Diverse Marine 27m CTV (Crew Transfer Vessel).
- Press Releases
AQS orders new hybrid service catamaran
Macduff Ship Design are pleased to announce that following extensive development work the shipping company AQS has selected Skagen Ship Consulting and Macduff Ship Design as main contractor and designer for a new 18.5m hybrid service vessel for aquaculture support services.
- Press Releases
Rotec achieves Parker Certified Accumulator Service Centre recertification
Rotec is pleased to announce it has been re-certified as a Parker Hannifin Hydraulic Accumulator Service and Technology Centre.
- Press Releases
Crab Fishing Vessel ‘EUROCLYDON’ delivery
Macduff Ship Design are delighted to announce the recent completion and delivery to its owners of the MFV EUROCLYDON, GY77.
- Press Releases
Geosynthetics: Protecting infrastructure, people, environment in the Red Sea
As more people move closer to coastlines and more islands are developed, especially in the GCC region, the demand for efficient coastal protection is only going to become increasingly important.
- Press Releases
Teignbridge CPP blades for Navy Frigates
Teignbridge has just completed another batch of CPP blades.
- Press Releases
TMS (Teignmouth Maritime Services Ltd) (Press releases)
TMS are pleased to announce that we have purchased a DAMEN Stantug 1605.
- Press Releases
A new era for China’s offshore wind industry as AFAI Southern Shipyard delivers new 32m CTV to Goldsea
Incat Crowther is proud to announce the handover of a new purpose-built catamaran CTV to Goldsea Marine & Offshore Engineering (Shanghai) Co Ltd (Goldsea).
- Press Releases
Marine Safety Booms: Protecting people in the water
With the lovely weather conditions in GCC countries as of late, the beach has become once again a more popular destination.
- Press Releases
‘FRUITFUL VINE’
Macduff Ship Design are pleased to announce the delivery of the new Macduff Shipyard built fishing vessel, ‘FRUITFUL VINE, BF 240’, to the owner’s Nicol Fishing Ltd.
- Press Releases
JB29 offshore wind safety equipment cabinets
Jo Bird are delighted to announce they have won an order for 77 of the JB29 offshore wind safety equipment cabinets.
- Press Releases
Electromagnetic clutches for marine & hydraulic pump applications
MMC electromagnetic clutches are designed for use with hydraulic pumps, many of which are used in marine winch drives. Typically flange or plate mounted, they engage and disengage the pump.
- Press Releases
Reliably start diesel engines and turbines even in extreme conditions
The reliable operating characteristics of JBJ pneumatic starters guarantees safe starting of diesel engines even under extreme environmental conditions.
- Subscribe
Get full access to Maritime Journal content
Including the digital magazine, full news archive, podcasts, webinars and articles on innovations and current trends in the commercial marine industry.
- Expert analysis and comment
- Unlimited access to in-depth articles and premium content
- Full access to all our online archive
Alternatively REGISTER for website access and sign up for email alerts
- Industry Database
- Events
Seawork returns in June 2023!
Seawork is Europe’s leading commercial marine and workboat exhibition, providing businesses the opportunity to showcase their products and services to an international audience.
Now in its 24th year, Seawork offers a unique combination of undercover exhibition space, open air demonstrations and floating displays. For more information on exhibiting, sponsoring or attending, click the button below:
Click here for more information