Windfarm CTVs going large

MHO Gurli has already been approved for transfers in significant wave heights exceeding 2m
'MHO Gurli' has already been approved for transfers in significant wave heights exceeding 2m
The two vessels will operate for Orsted in their Hornsea Project One offshore wind farm
The two vessels will operate for Orsted in their Hornsea Project One offshore wind farm
Industry Database

Tasmanian high speed catamaran designers Incat Crowther recently announced the delivery of the 39m Multipurpose Crew Transfer Vessels ‘MHO Gurli’ and ‘MHO Esbjerg’.

The vessels were built by PT Bintang Timur Samudera in Indonesia and delivered to MH-O & Co to be operated in European waters for Orsted in their Hornsea Project One offshore wind farm.

The vessels, designed by Incat Crowther, are the largest Wind Farm Support Vessels to enter service to date anywhere in the world.  They draw on Incat Crowther’s experience with larger offshore fast catamarans operating in the oil and gas industry.  The platform was specifically designed to deliver exceptional seakeeping, stability and comfort, whilst accommodating a highly redundant quad-engine / quad-jet propulsion package.  Unique to these vessels is the installation of continuously rated marine diesel engines, offering increase reliability and reduced maintenance costs.

LARGE WORKING DECK
The large Incat Crowther 39 platform is maximized with an aft-mounted superstructure, affording space on the stern for a transverse 20’ container and an extensive working deck forward. The result of a collaborative effort between MH-O & Co and Incat Crowther, this layout offers impressive functionality and accommodates many different load conditions including a variety of turbine maintenance operations.

Among these operations is a turbine gearbox swap.  With the turbine gearboxes weighing in at 32t each, this operation requires a stable and well-designed platform.

Other equipment on the main working deck includes a deck crane, ship’s boat and EU pallet tie-downs, in addition to hard points for task-specific winch installations. In total, 110 lineal feet of containers can be carried on this deck, with mounting feet allowing every 10 feet allowing for flexible combinations.

MHO Gurli has already been approved for transfers in significant wave heights exceeding 2m.

The main deck cabin is entered through the wet foyer at the aft end, with lockers, showers, toilets and change facilities for technicians and crew. Forward of this is a crew lounge to port and a crew lounge to starboard. Seating for 24 technicians is provided forward of this, with excellent forward visibility and KAB suspension seats enhancing comfort.

A set of stairs each side from the main deck cabin lead to the hulls, which house large storage and workshop facilities amidships and resting areas forward.

Upstairs, the mid-deck houses sleeping quarters for 6 crew members and 2 spare cabins, all in single berth cabins.  Pairs of cabins share an ensuite, while the master and officer cabins have their own ensuite bathrooms.

MHO Gurli and MHO Esbjerg are operated from the third deck, where the wheelhouse and workstations enjoy uninterrupted vision of the turbine tower and surrounding working areas.

QUAD POWERED
The vessels are fitted with a quad propulsion package, made up of four Cummins KTA38 main engines coupled to four KaMeWa S50-3 waterjets. This package gives MHO Gurli and MHO Esbjerg excellent flexibility and maneuverability, as well as redundancy. The top speed is 30 knots and service speed 25 knots, with endurance for 14 days of 24-hour operation, with capacity for 62,000 litres of fuel.

MHO Gurli and MHO Esbjerg are the result of a working partnership between MH-O & Co and Incat Crowther, demonstrating the value of a collaborative process.

By Jake Frith

Latest Press Releases

A reliable paint supplier is one less thing to worry about.

Large manufactures are keen to support and supply large orders but often the smaller ones attract le... Read more

Damen cuts steel for new Day Cruise Vessel

Building for an inland location with Damen Technical Cooperation Read more

ASFAT and Damen sign MOU at IDEF in Istanbul

On 2nd May, 2019 Damen Shipyards Group signed a memorandum of understanding (MOU) with Askeri Fabrik... Read more

Head office refurbishment for Watermota

Watermota’s head office in Heathfield, Devon, has recently had a major refurbishment to allow room f... Read more

Work begins on twin Damen Fast Crew Suppliers 2710 ordered by Hung Hua Construction Co. Ltd. of Taiwan

Work has begun at Damen Shipyards Singapore on the construction of two of Damen’s latest fast crew s... Read more

View all