Latest News – Page 525

  • Tooth replacement can be carried out by a single operator and the hammerless pin can be re-used several times
    News

    MTG gets its teeth into Europort

    2016-01-05T15:12:00Z

    Barcelona, Spain-based MTG Systems used the occasion of the recent Europort exhibition to introduce DMET, a hammerless system for replacing cutter suction dredger teeth which promises to maximise productivity.

  • With an eye on the future of the dredging profession, 60 promising graduate and post-graduate delegates were given funding to attend the event as part of the Young CEDA Student Programme
    News

    Dredging solutions abundant in Rotterdam

    2016-01-05T15:07:00Z

    Nearly 250 members of the dredging community gathered in Rotterdam last November for CEDA Dredging Days, which ran concurrently with the Europort exhibition.

  • News

    Hydro 2016 set for Germany

    2016-01-04T17:35:00Z

    Abstracts of papers for presentation at the International Federation of Hydrographic Societies’ (IFHS) 24th symposium and exhibition to be held in Rostock-Warnemunde from 8-10 November are now required by organisers of the major three-day event, The German Hydrographic Society (DHyG).

  • News

    Caris database for Swedish Hydrographic Office

    2016-01-04T17:32:00Z

    The Swedish Hydrographic Office, part of the governmental Swedish Maritime Administration (SMA) in Norrköping, has commissioned a Caris Hydrographic Production Database (HPD) as its basic system for current and future management of spatial data as well as efficient production of paper and electronic charts.

  • News

    Kongsberg extends HiPaP range of positioning systems

    2016-01-04T17:28:00Z

    Norway’s Kongsberg Maritime has extended its HiPaP range of widely adopted high precision acoustic positioning and navigation systems with introduction of what it calls a new third-generation model, HiPaP 502.

  • Renishaw’s new Merlin laser scanner for measuring and recording time-tagged geo-referenced
    News

    Time-tagged lidar for vessel-based surveys

    2016-01-04T17:23:00Z

    Renishaw, the Gloucestershire, UK-based multinational engineering organisation, has expanded its series of mobile 3D mapping systems with development of a low-cost, low-maintenance laser scanner specifically designed for hydrographic applications.

  • The national workshop in Batumi, Georgia took place on 15-17 December
    News

    GloMEEP project gets underway

    2016-01-04T14:49:00Z

    The first national workshop under the Global Maritime Energy Efficiency Partnerships (GloMEEP) project has been held in Georgia.

  • Originally SAMSA had two ETVs, now only the 'Smit Amandla' remains (SAMS...
    News

    New ETVs for South Africa?

    2016-01-04T11:10:00Z

    The South African Maritime Safety Authority (SAMSA) are considering building or leasing two emergency standby tugs to provide Emergency Towing Vessel (ETV) cover around the country’s coastline.

  • Mr John Witte Jr, ISU President (ISU)
    News

    More than a marine consultant with a good contacts book

    2016-01-01T17:20:00Z

    The new President of the International Salvage Union (ISU) has outlined areas of concerns facing the industry and the importance of promoting trust and transparency between salvor and client.

  • 'Baltic Ace' was cut with a chain saw into eight sections for lifting
    News

    Smit and Mammoet complete wreck removal

    2016-01-01T17:14:00Z

    Boskalis subsidiary Smit Salvage along with Mammoet Salvage have completed the complex wreck removal of a sunken car carrier that was presenting environmental and navigation risks to Europe’s largest port.

  • Kotug are increasing their Rotortug presence in Malaysia (Kotug)
    News

    TOWLINES (January 2016)

    2016-01-01T17:10:00Z

    Kotug Asia Sdn Bhd has commenced towage activities in the Malaysian port of Tanjung Pelapas (PTP) using two Rotortugs transferred from Europe in early 2015.

  • Towing 'on the hip' is one of the skills taught to tug deck hands (King Marine)
    News

    UK training for tug deck hands

    2016-01-01T17:07:00Z

    Lymington UK based King Marine Ltd has now run its second training course specifically intended for tug deckhands in a project attracting the attention of some major names in the towage industry.

  • Boluda's two new tugs are the first of a Piriou OST 30 design (Piriou - Boluda))
    News

    Boluda fleet expansion underway

    2016-01-01T17:04:00Z

    Spanish tug owner Boluda is making the news with delivery of the first two of four ASD tugs for operation in France and a progress report on the first two of an order for up to 10 Voith Water Tractors.

  • Twelve MTU engines will be supplied to Sanmar for six RAstar 2800-E ASD tugs (Rolls-Royce MTU)
    News

    Rolls-Royce MTU engines destined for Sanmar tugs

    2016-01-01T17:00:00Z

    Rolls-Royce and Turkish shipbuilder Sanmar Shipyards have signed a letter of intent for the supply of MTU engines for ASD tugs being built at the yard.

  • CMS's latest delivery will bring their Stan Tug fleet up to five in number (Damen)
    News

    Damen news – proceed to checkout

    2016-01-01T16:54:00Z

    News from Damen this month reports on delivery of no fewer than seven tugs of five different designs along with contracts signed with three owners for a further five vessels.

  • The display can be electronically tilted to a 35-degree angle
    News

    Paper-chart-sized touch display

    2015-12-31T11:59:00Z

    Netherlands-headquartered JRC and Alphatron Marine have announced a new digital AlphaChartTable. It includes a phenomenal 46-inch touch display, well known from the premium bridge design, where routes can be planned on a more realistic ‘paper chart’ scale.

  • The restoration of ‘Rotary Service’ has been completed by the Thames Class Lifeboat Trust, with a little help from industry partners
    News

    Lifeboat refurbishment project

    2015-12-31T11:08:00Z

    The Thames Class Lifeboat Trust is a new charity set up to refurbish an ex-RNLI lifeboat which was built in Lowestoft, for use as a community resource and youth training vessel.

  • At its core, the C9.3 ACERT is a 6 cylinder, 9.3 litre engine
    News

    Caterpillar Marine Unveils Cat C9.3 ACERT

    2015-12-30T15:55:00Z

    Germany-headquartered Caterpillar Marine released the Cat C9.3 ACERT Marine platform to the international commercial marine market at the International Workboat Show in Louisiana, USA in December.

  • News

    Cloud based vessel management

    2015-12-30T15:41:00Z

    USA-based WheelHouse Technologies, Inc. has launched WheelHouse Underway, a tablet application for iOS, Android, and Windows devices now available on the App stores.

  • the Interceptor 1503 can reach speeds of up to 60 knots
    News

    Moroccan interceptors

    2015-12-30T15:27:00Z

    In a third recent construction contract with Netherlands-headquartered Damen Shipyards Group, the Royal Moroccan Navy has ordered five Interceptor 1503 vessels. The vessels will be mobilised to combat illegal activities such as terrorism and smuggling in Moroccan waters.